SATO s86ex - ESC+IR Internal Buffer Registration(Received Data)

279
15.9 Intelligent Command
ESC+IR Internal Buffer
15.9
Registration(Received Data)
ESC+IR
Hexadecimal
code
ESC
IR
Parameter
<1B>
16
<49>
16
<52>
16
aa,bb(,cccc)(,d)(,eeee)(,ffffff)(,gggg…g)
Initial value
Nil
Valid range and
term of
command
When the power switch is OFF
The set parameter is not maintained.
Valid range within item
The parameter preset will be invalid.
Valid range between item
The parameter preset will be invalid.
[Function]
Acquire received data from the sub port.
It is possible to store acquired data up to 32 digits for 16 blocks in the internal buffer (RAM).
The stored data can be recalled by the data acquisition command <IB> and use them as the print data.
[Format]
<IR>aa,bb(,cccc)(,d)(,eeee)(,ffffff)(,gggg･･･g)
●Parameter
a[Internal buffer number] = Valid range : 1 ～ 16
b[Acquired digit] = Valid range : 1 ～ 32
c[Received data import start position] = Valid range : 0 ～ 9999 (Omissible)
d[Digit of terminate code] = Valid range : 1 ～ 4 (Omissible)
e[Terminate code] = No code range specification, 4 digits (Omissible)
f[Timeout time] = Valid range : 0 ～ 999999(1=5ms) (Omissible)
When this parameter is omitted, the printer will not be proceeded to the next
command analysis until data for specified digit are received.
g[Data item name] = Valid range : Only alphanumeric and symbols 16 digits(omissible)
[Coding Example 1] Store the received 6 byte data to the internal buffer
(Start code, terminate code, time out time and data item name are omitted)
<A>
<IR>1,6
<Z>
[Coding Example 2] Store the received 6 bytes data to the internal buffer
(Start position and terminate code are omitted)
<A>
<IR>1,6,,,,1000,ITEM＿CODE
<Z>
Internal buffer
No
Item name
Number
of digits
Data
01
6
123456
02
0
03
0
.
.
.
.
.
.
.
.
.
.
.
.
16
0
Host
(1) Send <IR>
External
peripherals
Data Port
Sub Port
Printer
(2) Received data "123456"
(3) Store the data
Internal buffer
No
Item name
Number
of digits
Data
01
ITEM_CODE
6
ABCDEF
02
0
03
0
.
.
.
.
.
.
.
.
.
.
.
.
16
0
Host
(1) Send <IR>
External
peripherals
Data Port
Sub Port
Printer
(2) Received data "ABCDEF"
(3) Store the data
Internal Buffer Registration
(Received Data)