SATO s86ex - ESC+A1 Label Size

214
12.3 System
ESC+A1 Label Size
12.3
ESC+A1
Hexadecimal
code
ESC
A1
Parameter
<1B>
16
<41>
16
<31>
16
aaaabbbb
VaaaaaHbbbb
Initial value
Nil
Valid range and
term of
command
When the power switch is OFF
The set parameter is not maintained.
Valid range within item
The set parameter is in effect until a new specification is made.
Valid range between item
The set parameter is in effect until a new specification is made.
[Function]
Specifying the size of the label.
[Format]
<A1>aaaabbbb (a, b fixed) [Note] When the height of the label is equal to or less than 9999.
<A1>VaaaaaHbbbb (a, b variable specification enabled)
●Parameter
a[Height of label] = Refer to the table below
b[Width of label] = Refer to the table below
[Specified Range]
[S84-ex]
Head density
Width of label (dots)
Height of label (dots)
8dots/mm (203 dpi)
1 ~ 832
1 ~ 20000
12dots/mm (305 dpi)
1 ~ 1248
1 ~ 18000
24dots/mm (609 dpi)
1 ~ 2496
1 ~ 9600
[S86-ex]
Head density
Width of label (dots)
Height of label (dots)
8dots/mm (203 dpi)
1 ~ 1340
1 ~ 9992
12dots/mm (305 dpi)
1 ~ 2010
1 ~ 14988
[Coding Example 1] Width of label: 800dots Height of label : 640dots
<A>
<A1>08000640
<Z>
[Coding Example 2] Width of label : 800dots Height of label : 640dots
<A>
<A1>V800H640
<Z>
[Coding Example 3] Width of label : 1200dots Height of label : 40dots
<A>
<A1>12000040
<Z>
[Coding Example 4] Width of label : 1200dots Height of label : 40dots
<A>
<A1>V1200H40
<Z>
[Coding Example 5] Width of label : 11200dots Height of label : 240dots
<A>
<A1>V11200H240
<Z>
Label Size