SATO s86ex - Intelligent Command; ESC+IK Media Feed Control

268
Intelligent Command 15
15.1 Intelligent Command
ESC+IK Media Feed Control
15.1
ESC+IK
Hexadecimal
code
ESC
IK
Parameter
<1B>
16
<49>
16
<4B>
16
a(,bbbb)
Initial value
Nil
Valid range and
term of
command
When the power switch is OFF
The set parameter is not maintained.
Valid range within item
The parameter preset will be invalid.
Valid range between item
The parameter preset will be invalid.
[Function]
Feed or backfeed the media for the specified length.
[Format]
<IK>a(,bbbb)
●Parameter
a[Feed direction] = 0 : Forward direction
1 : Backward direction
b[Feed length] = Valid range: Refer to the table on the next page (Omissible for forward direction)
One label will be fed when this parameter is omitted.
[Coding Example 1]
<A>
<IK>0,120
<Z>
The printing starts from the current position when print data are received without returning to the original position with
<IK>1,120.
[Coding Example 2] Feed for one label
<A>
<IK>0
<Z>
(1)
Before the command
After the command
Feed 120dots for forward direction
After the command
(2)
(3)
(1)
(2)
(3)
Head position
(1)
Before the command
After the command
Feed for one label
After the command
(2)
(3)
(1)
(2)
(3)
Head position
Media Feed Control