SATO s86ex - ESC+GT Registration of BMP File

246
13.10 Memory Card
ESC+GT Registration of BMP File
13.10
ESC+GT
Hexadecimal
code
ESC
GT
Parameter
<1B>
16
<47>
16
<54>
16
aaa,bbbbb,n~n
Initial value
Nil
Valid range and
term of
command
When the power switch is OFF
The registered data becomes valid.
Valid range within item
The parameter preset will be invalid.
Valid range between item
The parameter preset will be invalid.
[Function]
Specifying the registration of BMP file created by such as Paint Brush of Windows.
[Format]
<GT>aaa,bbbbb,n~ｎ
●Parameter
a[Registration No.] = 1 to 999
b[Total bytes of BMP file] = 1 to 99999
Specify the file size of BMP file for total bytes.
n[Data] = BMP file data
Data is sent as binary data (Outputs 8 bits as one character data all at once)
[Coding Example]
<A>
<CC>1
<GT>1,12345,n~n
<Z>
[Notes]
1. Make sure to specify the slot number used for card slot command <CC> before the BMP file registration command <GT>.
2. Data is sent as binary data (Outputs 8 bits as one character data all at once). In this case, the file size of BMP file becomes
the total bytes, and BMP file data becomes data.
3. In BMP file, 62 bytes of data is for the header part and the rest of data is for the image data.
4. When [Total bytes of BMP file] are not matching the transfer data, this may become the cause of malfunction.
5. Total bytes are the file size displayed at [Property] and such.
6. BMP file is available in Black/White mode only. In color mode, printing will not be performed due to command error. Also,
this command is not valid for the BMP compressed file. Make sure that the file extension is set to [BMP] before printing.
7. Specify Card Slot for use <CC> prior to this command.
8. The error occurs when unused or the slot which the printer is allocated is specified (Refer to Card Slot for Use <CC>).
[Important]
Do not turn the printer power off when accessing to the memory. When the printer power is off while memory accessing,
the data in the accessed media may be corrupted.
Registration of BMP File