SATO s86ex - Black and White Reverse Print; Esc

27
17.1 Modification
17.1 ESC+( Black and White Reverse
Print
ESC+(
Hexadecimal
code
ESC
(
Parameter
<1B>
16
<28>
16
aaaa,bbbbb
Initial value
Nil
Valid range and
term of
command
When the power switch is OFF
The set parameter is not maintained.
Valid range within item
The parameter preset will be invalid.
Valid range between item
The parameter preset will be invalid.
[Function]
Reversing and printing an image area from black to white and vice versa.
[Format]
<(>aaaa,bbbbb
●Parameter
A[Horizontal length in dots of the reverse image area] = Refer to the table below
B[Vertical height in dots of the reverse image area] = Refer to the table below
[Coding Example] Horizontal length in dots of reverse image area: 200, Vertical height in dots of reverse image area: 70
<A>
<V>50<H>50<P>2<L>0202<XM>ABC
<V>50<H>50<(>200,70
<Q>2
<Z>
[Notes]
1. Specify this command after the print data which to be reversed. When this command is specified before the print data
which to be reversed, the image is printed in black and not reversed.
2. To set print start position, specify Horizontal Print Position <H> and Vertical Print Position <V> prior to this command.
3. When the print start position is outside of the printable area, printing will not be performed due to command error.
[Remark]
Keep the black printable area under 30% of overall label.
[Valid range]
[S84-ex]
Head density
Valid range (dots)
Reverse area in horizontal
direction
Reverse area in vertical direction
8 dots/mm (203 dpi)
8 to 832
8 to 20000
12 dots/mm (305 dpi)
8 to 1248
8 to 18000
24 dots/mm (609 dpi)
8 to 2496
8 to 9600
[S86-ex]
Head density
Valid range (dots)
Reverse area in horizontal
direction
Reverse area in vertical direction
8 dots/mm (203 dpi)
8 to 1340
8 to 9992
12 dots/mm (305 dpi)
8 to 2010
8 to 14988
V50(dots)
H50(dots)
200(dots)
70(dots)
Label feed direction
Black and White Reverse Print