SATO s86ex - ESC+RF Call and Print of Font & Logo

35
24.1 Modification
24.1 ESC+RF Call and Print of Font &
Logo
ESC+RF
Hexadecimal
code
ESC
RF
Parameter
<1B>
16
<52>
16
<46>
16
aabbbb,n～n
Initial value
aa=01, bbbb=1
Valid range and
term of
command
When the power switch is OFF
The set parameter is not maintained.
Valid range within item
The parameter preset will be invalid.
Valid range between item
The parameter preset will be invalid.
[Function]
Invoking and printing the font and logo downloaded with the exclusive tool.
[Format]
<RF>aabbbb,n～n
●Parameter
a [Font ID number] = Valid range: 01 to 99
b [Print digit] = Valid range: 1 to 9999
n [Print data] = Data
[Coding Example 1] When [AB] is printed in one-byte characters with this command [Font ID No.: 01 Print digit: 4]
(Unicode A: <0041>
16
B: <0042>
16
)
<A>
<PS>
<V>100<H>100<L>0101
<RF>010004,<0041>
16
<0042>
16
<Z>
[Coding Example 2] When calling and printing logo [Font ID No.: 02 Print digit: 2]
<A>
<V>100<H>100<L>0101<RF>020002，<826B>
16
<Z>
[Notes]
1. Specify the value of print data putting Unicode (UTF-16BE).
2. When calling and printing logo, specify [Print digit: 0002], [Print data: <826B>16].
Call and Print of Font & Logo