SATO s86ex - Status 4; Return Sequence

350
2.6 Status 4
This communication protocol is designed for the purpose of controlling print status in the host, and the printer returns the status by
receiving request command from the host.
Refer to [2.2.3
Return status of Status 4
] and [2.2.5
Other return status
(Common to Status 3, Status 4, and Status 5)] for details
of the request command and the return status.
Return Sequence 2.6.1
Refer to [6.15 Printer status] when using LAN/wireless LAN interface.
1) Normal
~
~
ID number = [05]
Status = "Printing"
Remaining print number
=[000100]
Job name = [SATO]
ID Number = [Space]
Status = "Waiting for receive"
Remaining print number =
[000000]
Job name = [Space]
ID number = [05]
Status = Paper end
Remaining print number =
[000098]
Job name = [SATO]
ID number = [05]
Status = "Printing"
Remaining print number =
[000098]
Job name = [SATO]
ID number = [05]
Status = "Printing"
Remaining print number =
[000001]
Job name = [SATO]
ID number = [06]
Status = "Printing"
Remaining print number =
[000050]
Job name = [SATO]
ID number = [05]
Print number = 100
Job name = [SATO]
Host
Printer
ENQ
(Status request command)
Status
ENQ
(Status request command)
ENQ
(Status request command)
ENQ
(Status request command)
ENQ
(Status request command)
Status
Print command
Status
Print command
Status
Status
ENQ
(Status request command)
Status
Receive/Analysis/Edit
Print operation
(Printer status: no error) *1
ID number = [06]
Print number = 50
Job name = [SATO]
ID number = [05]
Status = "Editing"
Remaining print number =
[000000]
Job name = [SATO]
(Printer status: no error) *1
ACK
*1 The printer will return the status
at print command reception when
using RS-232C and Bluetooth.
Status
ACK
ENQ
(Status request command)
~
~
~
~
Print the 100th label
Print the 1st label
Print the 3rd label
Erro relese
(press the LINE key)
Print the 3rd label
Paper end error
Print the 2nd label
Print the 1st label