SATO s86ex - Adjusting the Base Reference Point

239
[Remark]
Details of Format Registration
A group of commands can be registered to a memory card .Once registered, it saves time to specify the identical command
group.
The registration also allows a change of print data when invoking the format. Such function is called “Format Registration”.
One item consists of different command groups necessary for printing, and such groups are called “Field”. Note that multiple
fields make format.
Commands for format registration :
One format consists of a set of commands from Start of Data Transmission <A> to End of Data Transmission <Z>, and specify
Registration of Format <YS> right after <A>. For <YS>, specify [Format registration No.] between 1 and 99999. And then, insert
Registration of Field </N> after <YS> to specify [Field No.] and [Digit No. of print quantity].
After [Field No.] and [Digit No. of print quantity] is entered, specify print position, character type, barcode, and so on.
[Registration Example]
Invoking the registered print contents
Specify saved [Format registration No.] between 1 and 99999 with Format Call <YR>.
To change print data, use Print of Field <D> to specify [Field No.] to be changed, and continuously specify the changed print data.
Note that the underlined parts in the [Registration Example] are changeable.
[Calling Example]
<A>
<YS>,1
</N>,1,10
<V>10<H>50
<B>2020801234567890
</N>,2,5
<V>100<H>50<L>0101<P>2
<XM>12345
</N>,3,6
<V>200<H>300<L>0101<P>2
<XM>123456
<Z>
Data to be registered to Field No. 3
Data to be registered to Field No. 2
Data to be registered to Field No. 1
Format registration No.
Digit No. of print quantity
Field No.
Specified by Filed No. 1
12345
123456
Specified by Filed No. 2
Specified by Filed No. 3
Label feed direction
<A>
<YR>,1
</D>,2,ABCDE
<Q>2
<Z>
Format registration No. to invoke
Field No. of print data to be changed
Data to be changed
ABCDE
Changed data
123456
Label feed direction