SATO s86ex - Page 334

326
4) Print Pause Request Command
This command stops the printing process.
The printer returns the printer status after receiving process is completed.
(1) Command DLE (HEX 10H)
(2) Return status list
Return Status
Description
ACK (HEX 06H)
No error in the printer
NAK (HEX 15H)
Error at the printer
*When LEGACY STATUS setting is enabled with LAN (Port3 (9100)), Wireless LAN (Port2 (1025), and Port3 (9100)) .
In the case of LAN/Wireless LAN other than stated above, ACK hexadecimal 000000106H, NAK will be hexadecimal
000000115H.
Do not send print pause request command within STX <A>~<Z> ETX. DLE (print pause request) may
not be send correctly. DLE (print pause request) in font data, graphics data and barcode data is not
processed.
5) Print resume request command
This command enables to release the print pause and resume printing.
The printer returns the printer status after receiving process is completed.
(1) Command DC1 (HEX 11H)
(2) Return status list
Return Status
Description
ACK (HEX 06H)
No error in the printer
NAK (HEX 15H)
Error at the printer
*When LEGACY STATUS setting is enabled with LAN (Port3 (9100)), Wireless LAN (Port2 (1025), and Port3 (9100)) .
In the case of LAN/Wireless LAN other than stated above, ACK hexadecimal 000000106H, NAK will be hexadecimal
000000115H.