Attach the ground lug to the lightning arrestor mounting
bracket with the supplied bolt and lock washer.
Using the supplied hardware, loosely mount the 4 lightning
arrestors on the bracket in the orientation shown.
Do not tighten the mounting hardware.
Twist and fold the end of the supplied
ground strap and feed it completely
through the ground lug.
Tighten the set screw to secure the
ground strap.
set screw
ground lug
lock washer
bolt
lightning arrestor
bracket
mounting holes for
lightning arrestors
lightning arrestor
gas capsule
holder
arrestor ring
external
tooth washer
ground strap
twisted, folded
and passed
through lug
tighten set
screw
nut
ground lug
sensor cable
connector
ground strap
processor connector
individual
ground
connection
(leave disconnected)
To Next Page
Loading...
