Simplex 4010 User Manual

8-5
Table 8-3 lists Output Opcodes for the 4010 Custom Control option.
Table 8-3. Output Opcodes
Output Opcodes Description
SET ON Set Point ON (refreshes continuously)
SET OFF Set Point OFF (refreshes continuously)
SET PRI Set Point’s priority (refreshes continuously)
TRACK ON Track Point ON
TRACK OFF Track Point OFF
TRACK PRI Track Point’s Priority
HOLD ON Hold Point ON
HOLD OFF Hold Point OFF
HOLD PRI Hold Point’s Priority
ACK Acknowledge Point
DISABLE Disable Point
ENABLE Enable Point
RESET Reset
LOAD CNST Load Analog Pseudo Point w/Constant Value
LOAD VAR Load Analog Pseudo Point w/Variable Value
PULSE CNST Pulse Analog Pseudo Point w/Constant Value
PULSE VAR Pulse Analog Pseudo Point w/Variable Value
LED OFF Turn LED/Lamp OFF
LED ON Turn LED/Lamp ON
F FLASH Fast Flash Point (LED)
S FLASH Slow Flash Point (LED)
S MARCH Slow March Code the Point
F MARCH Fast March Code the Point
TEMPORAL Temporal Code the Point
CHAN CODE (IDNet) Set up IDNet Channel Code (ON\Temporal\March Time)
DEV CODE (TrueAlarm sensor outputs) Device Code
ALARM THR Set Alarm Threshold (sensitivity)
ROR HEAT Rate-of-Rise Heat (set for sensitivity)
SMPL Opcodes and Operators, Continued
Output Opcodes
Pro
g
rammin
g
Technical Manuals Online! - http://www.tech-man.com

Simplex 4010 Specifications

General

Display	LCD
Power Supply	120/240 VAC, 50/60 Hz
Manufacturer	Simplex
Model	4010
Battery Backup	24 VDC
NAC Outputs	4
Max Detectors	250
Max Modules	250
Operating Temperature	0°C to 49°C (32°F to 120°F)
Humidity Range	Up to 93% RH, non-condensing