Simplex 4010 - Accept Default Settings for System Options; Procedure

4-5
1. Press <MENU>.
2. Press <NEXT> or <PREVIOUS> until [Quick CFIG] is displayed and
then press <ENTER>. A warning appears, indicating that the that the 4010
is no longer in the Fire Alarm Operation mode.
3. Press <ENTER> to continue with the Quick-CFIG option.
4. Press <NEXT> or <PREVIOUS> until <ACCEPT DEFAULT
OPTIONS> is displayed and then press <ENTER>. A warning appears,
indicating that this operation may change current settings.
5. Press <ENTER> to continue. The following message appears, indicating
that the system is restoring the default settings for system options.
Accept Default Settings for System Options
Procedure
Please Wait . . .
Fire Alarm Operation Suspended
WARNING <Enter> to Continue WARNING
This may CHANGE current setting
** Default Settings Restored **
Pro
g
rammin
g
Technical Manuals Online! - http://www.tech-man.com