4-4
This option restores the 4010 to its original (factory default) CFIG. All pseudo
points (Analog and Digital) are cleared, Custom Control is erased, etc.
1. Press <MENU>.
2. Press <NEXT> or <PREVIOUS> until [Quick CFIG] is displayed and
then press <ENTER>. A warning appears, indicating that the 4010 is no
longer in the Fire Alarm Operation mode.
3. Press <ENTER> to continue with the Quick-CFIG option.
4. Press <NEXT> or <PREVIOUS> until <RESTORE FACTORY
CONFIG.> is displayed and then press <ENTER>. A warning appears,
indicating that this will delete the current configuration.
5. Press <ENTER> to continue. The following message appears, indicating
that the system is restoring the factory default configuration.
This message is followed by a series of internal test messages. The High-Level
Status screen appears when the operation is complete.
Restore Factory CFIG
Overview
Procedure
Please Wait . . .
Fire Alarm Operation Suspended
WARNING <Enter> to Continue WARNING
This will DELETE current configuration
** Restoring Factory Default Panel **
Technical Manuals Online! - http://www.tech-man.com
To Next Page
Loading...
