11-5
This section describes how to view and clear the Historical Logs on the 4010.
The 4010 has three logs; Alarm, Supervisory, and Trouble. The logs can be
viewed separately, or they can be viewed in chronological sequence as a single
Combined log. Each log records information about the event and the time the
event occurred. Table 11-1 describes the different logs and their stored events.
Table 11-1. Historical Logs and Events
Historical Log Stored Events
ALOG
Alarm Log (up to 100
entries)
• Alarms
• Alarm Ack (global only)
• Log cleared
• Alarm Silence
• System Reset
SLOG
Supervisory Log (up to 50
entries)
• Supervisory conditions
• Supervisory Ack (global only)
• Log cleared
TLOG
Trouble Log (up to 300
entries)
• All card and system troubles
• Login/Logout for Level 2 or higher
• Log cleared
• Walk Test events (abnormal and
trouble)
• TrueAlarm peak values (if selected)
CLOG
Combined Log (all entries)
• All Events in chronological order
Figure 11-2 shows an example of an Alarm Log.
Figure 11-2. Sample Alarm Log Screen
Continued on next page
Viewing and Clearing Historical Logs
Overview
ALOG: 1/34 10:09:01 am Wed 14-May-97
Fire Alarm
One of 34 Alarm Log
Time and Date of Event
Operation
Technical Manuals Online! - http://www.tech-man.com
To Next Page
Loading...
