Simplex 4010 User Manual

5-1
The 4010 allows you to manually configure each option card in the system. This
chapter describes how to add, delete, or modify optional cards in the 4010
FACP.
Note: The system must be powered down before cards are added to
the system.
This chapter discusses the following topics:
Topic See Page #
Card Addresses 5-2
Adding, Deleting, or Modifying 4010 Cards 5-3
Chapter 5
Configuring Cards
Overview
In this Chapter
Pro
g
rammin
g
Technical Manuals Online! - http://www.tech-man.com

Simplex 4010 Specifications

General

Display	LCD
Power Supply	120/240 VAC, 50/60 Hz
Manufacturer	Simplex
Model	4010
Battery Backup	24 VDC
NAC Outputs	4
Max Detectors	250
Max Modules	250
Operating Temperature	0°C to 49°C (32°F to 120°F)
Humidity Range	Up to 93% RH, non-condensing