Simplex 4010 User Manual

10-9
Use Steps 1 through 5 and Figures 10-7 and 10-8 to activate TrueTest.
1. From the High-Level Status screen, press <MENU>.
2. Press <NEXT> or <PREVIOUS> until [TrueTest] is displayed and then
press <ENTER>.
3. Press <ì> or <ö> to move the focus brackets to the desired option.
4. Press <NEXT> or <PREVIOUS> to enable the options listed in Table 10-2.
5. Once all options are set, press <ENTER> to activate TrueTest.
Figure 10-7. TrueTest Options
Figure 10-8 shows an example of the TrueTest screen with the default values.
Figure 10-8. TrueTest Screen
TrueTest, Continued
Using TrueTest
Walk Test
• On/Off
• Log/NoLog
• Print/NoPrint
• DACT/NoDACT
• NoCTRL/CTRL
Top Level Menus
TrueTest Quick CFIG
<ENTER> to Accept <ARROW KEYS> to Change
[Off] Log Print NoDACT NoCTRL
Focus Brackets
Dia
g
nostics/Troubleshootin
g
Technical Manuals Online! - http://www.tech-man.com

Simplex 4010 Specifications

General

Display	LCD
Power Supply	120/240 VAC, 50/60 Hz
Manufacturer	Simplex
Model	4010
Battery Backup	24 VDC
NAC Outputs	4
Max Detectors	250
Max Modules	250
Operating Temperature	0°C to 49°C (32°F to 120°F)
Humidity Range	Up to 93% RH, non-condensing