Simplex 4010 - Chapter 1. 4010 FACP Overview; Introduction; In this Chapter

1-1
The 4010 is a single-channel, addressable, modular Fire Alarm Control Panel
(FACP) that monitors and controls up to 250 IDNet addressable devices. The
Standard Function Input/Output (SFI/O) card, power supply, and cabinet provide
a complete fire alarm control panel for most applications. Optional modules
mount to the chassis to provide additional inputs and outputs, network
communication, and additional power. Additionally, the 4010 can automatically
control supplementary equipment such as fire doors and fans during an alarm
condition using its auxiliary relay outputs.
The 4010 provides audible and visible indications during trouble, supervisory, or
alarm (fire) conditions. Should any of these conditions occur, the system
activates the applicable notification appliance(s), LEDs, and the panel tone-alert.
The indications continue until someone appropriately acknowledges the
condition.
This publication describes how to install, configure, operate, program, and test
the Simplex 4010 Fire Alarm Control Panel (FACP).
This chapter discusses the following topics:
Topic See Page #
Related Documentation 1-2
Base System Module 1-3
Optional System Modules 1-5
User Interface 1-9
Passcodes, Access Levels, and Logging In and Out 1-12
Menu Structure 1-14
Chapter 1
4010 FACP Overview
Introduction
In this Chapter
Overview
Technical Manuals Online! - http://www.tech-man.com