Simplex 4010 User Manual

7-1
This chapter describes how to set system options such as Time/Date Format,
Active Status Reminder, etc. These options are custom functions for the 4010.
The System Options (shown in Figure 7-1) can also be set from the Quick-CFIG
menus.
This chapter discusses the following topics:
Topic See Page #
System Options Menu 7-2
Time/Date Format 7-3
Active Status Reminder 7-4
Silence/Reset Inhibit 7-5
Alarm Cut-Out Timer 7-6
Door Drop on Alarm 7-7
Door Drop on AC Loss 7-8
Audible and Visual NAC Operation 7-9
TrueAlert Non-Addressable Horn Operation 7-10
Depleted Battery Cut-Out 7-11
Stagger Start AHUs 7-12
Enable City Circuit 7-13
Expansion Power 7-14
Single Station 7-15
Suppression Release 7-16
Chapter 7
System Options
Overview
In this Chapter
Pro
g
rammin
g
Technical Manuals Online! - http://www.tech-man.com

Simplex 4010 Specifications

General

Display	LCD
Power Supply	120/240 VAC, 50/60 Hz
Manufacturer	Simplex
Model	4010
Battery Backup	24 VDC
NAC Outputs	4
Max Detectors	250
Max Modules	250
Operating Temperature	0°C to 49°C (32°F to 120°F)
Humidity Range	Up to 93% RH, non-condensing