Simplex 4010 User Manual

6-1
The 4010 allows you to manually program each point in the system. This
chapter describes how to add, delete, edit, etc., points in the 4010 FACP. The
following information assumes you have all cards properly installed. If your
cards are not installed properly or need modification, refer to “Chapter 5 -
Configuring Cards.”
This chapter discusses the following topics:
Topic See Page #
Overview 6-1
Configure Points Menu 6-2
Configuring TrueAlarm Points 6-3
Configuring ZAM/IAM/RIAM Points 6-6
Configuring Relay and NAC Points
6-9
Configuring Digital and Analog Pseudo Points
6-11
Configuring 24-Point I/O Points
6-14
Configuring List Points
6-18
Configuring User-Defined SW/LED Points
6-21
Chapter 6
Configuring Points
Overview
In this Chapter
Pro
g
rammin
g
Technical Manuals Online! - http://www.tech-man.com

Simplex 4010 Specifications

General

Display	LCD
Power Supply	120/240 VAC, 50/60 Hz
Manufacturer	Simplex
Model	4010
Battery Backup	24 VDC
NAC Outputs	4
Max Detectors	250
Max Modules	250
Operating Temperature	0°C to 49°C (32°F to 120°F)
Humidity Range	Up to 93% RH, non-condensing