Recording still images on a "Memory
Stick" - Memory Photo recording
_q_Dr
You can record still images on a" Memory Stick."
You can select the FIELD or FRAME mode in still image recording. Your camcorder
compensates for camera-shake when recording moving subjects in the FIELD mode.
Your camcorder records in high quality in the FRAME mode. Select the FIELD or
FRAME in the menu settings (p. 217). (The default setting is FIELD.)
Before operation
Insert a" Memory Stick" into your camcorder.
(1) Set the POWER switch to MEMORY. Make sure that the LOCK switch is set to
the left (unlock) position.
(2) Keep pressing PHOTO lightly until the desired still image appears. The green
• mark stops flashing, then lights up. The brightness of the image and focus
are adjusted and fixed while your camcorder targets at the middle of the
image. Recording does not sta_l yet.
(3) Press PHOTO deeper. The shutter sounds, and the image becomes still.
Recording is complete when the bar scroll indicator disappears.
The image when you pressed PHOTO deeper will be recorded on the
"Memory Stick."
1
/
3
You can record still images on a n Memory Stick" in CAMERA
mode.
For details, see page 53.
132
To Next Page
Loading...
Need help?
General