Superimposing a title
To superimpose the title while you are recording
Press TITLE while you are recording, and carry out steps (2) to (5). When you press the
SEL/PUSH EXEC dial at step (5), the title is recorded.
To select the language of a preset title
If you want to change the language, select r_ before step (2). Then select the desired
language and return to step (2).
Note_ _
The date and time, or either of them, may not be displayed depending on the size or
position of the title.
If you display the menu while superimposing a title
The title is not recorded while the menu is displayed.
To use a custom title
If you want to use a custom title, select I_l in step (2).
Title setting
• The title color changes as follows:
WHITE _ YELLOW *-+ VIOLET _ RED *-+ CYAN *-+ GREEN *-+ BLUE
• The title size changes as follows:
SMALL *-+ LARGE
You cannot input 13 characters or more in LARGE size. If you input more than 12
characters, the title size returns to SMALL even if you select LARGE.
• The title position changes as follows:
1 *-* 2 ,_+ 3 ¢-+ 4 *-* 5 *-, 6 ¢-+ 7 ,_+ 8 ,_+ 9
The larger the position number, the lower the title is positioned.
When you select the title size" LARGE," you cannot choose position 9.
In CINEMA mode, you cannot choose position 9 for "SMALL" size titles, and position
8 or 9 for" LARGE" size titles.
When you are selecting and setting the title
You cannot record the title displayed on the screen.
When you superimpose a title while you are recording
The IJeep does not sound.
While you are playing back
You can superimpose a title. However, the title is not recorded on the tape.
You can record a title when you dub a tape by connecting your camcorder to a VCR
with the A/V connecting cable.
If you use the i.LINK cable instead of the A/V connecting cable, you cannot record the
title.
76