Sony CCD-TRV118 - To Cancel Memory MIX; To Change the Still Image to Superimpose

Superimposing a still image in the" Memory Stick" on an image
• MEMORY MIX
To change the still image to superimpose
Do either of tile following:
Press MEMORY+/ before step (7).
Press the SEL/PUSH EXEC dial before step (7), and repeat the procedure from step
(3).
To change the mode setting
Press the SEL/PUSI I EXEC dial before step (7), and repeat the procedure from step (4).
To cancel MEMORY MIX
Press MEMORY MIX.
Notes
• You cannot use MEMORY MIX for moving pictures recorded on a" Memory Stick."
• When the overlapping still image has a large amount of white, the thumbnail image of
the picture may not be clear.
Image data modified on your computer or shot with other equipment
You may not be able to play modified images back with your camcorder.
When you selectM. OVERLAP
You cannot change the still image or the mode setting.
During recording
You cannot change the mode setting.
Sampleimages
• Tile" Memory Stick" supplied with your camcorder is already stored with tile
protected 20 images _ :
For M. CHROM: 18images {such as a frame) 101-0001to 101-0018
For C. CHROM: two images (such as a background} 101-0019 to 101-0020
• The CD-ROM supplied with your camcorder is already stored with 20 images (p. 191):
For M. CHROM: 18images {such as a frame) DSC 00001 to DSC 00018
For C. CHROM: two images (such as a background) DSC 00019 to DSC 00020
142