Recording images from a tape as still
,mages
Your camcorder can read moving picture data recorded on a tape in the Digital8 [)
system, and record it as a still image on a" Memory Stick."
Your camcorder can also capture moving picture data through the input connector and
record it as a still image on a" Memory Stick."
Before operation
• Insert a tape recorded in the Digital8 D system into your camcorder.
• Insert a" Memory Stick" into your camcorder.
(1) Set the POWER switch to VCR.
(2) Press I_. Moving pictures recorded on the tape are played back.
(3) Keep pressing PHOTO lightly until the picture from the tape freezes.
The CAPTURE indicator appears on the screen. Recording does not start yet.
To change the still image, release PHOTO and select a still image again.
(4) Press PHOTO deeper. Recording is complete when the bar scroll indicator
disappears. The image displayed on the screen when you pressed PHOTO
deeper will be recorded on the" Memo_3z Stick." Playback of the tape is
resumed.
PLAY
4
FiNE IIIIIIIID
136
To Next Page
Loading...
