Recording images from a tape as still images
When the accesslamp islit or flashing
Do not shake or knock the unit. Also do not turn the power off, eject the" Memory
Stick" or remove the batte_T pack. Otherwise, image data may become damaged.
If the gfl indicator appears on the screen
The inserted" Memory Stick" is incompatible with your camcorder because its format
does not conform with your camcorder. Check tile format of the" Memory Stick."
If you press PHOTO lightly in the playback mode
Your camcorder stops momentarily.
Soundrecorded ona tape
You cannot record audio from a tape.
When you press PHOTO on the Remote Commander
Your camcorder immediately records the image that is on tile screen when you press
the button.
Titlessuperimposedon tapes
You cannot record titles on the" Memo=T Stick." However, you can record titles which
have already been recorded on tapes.
Data code
The data code (date/timP) when it is recorded on the _Memory Stick" fi-om a tape is
recorded.
The data code (various settings) is not recorded.
The data codes recorded on a tape are not recorded.
While recording images from a tape as still images
The image is recorded in the FRAME mode automatically even if you select FIELD in
the menu settings.
Recording folder
You cannotchangethe recording folder.
The recording folderyou selected whenthe POWER switch wassettoMEMORY is
used (p. 162).
g_
O
O
g
137
To Next Page
