- Viewing Images on Your Computer -
Viewing images on your computer
- Introduction
The following are ways of connecting the camcorder to a computer to view images
saved on a" Memory Stick" * _ _, recorded on tape or live from your
camcorder on your computer.
* To view images on a computer which has a Memory Stick slot, first remove the
"Memory Stick" from the camcorder and then insert it into tile computer's Memory
Stick slot.
Camcorder Connection Connection Computer environment
jack cable requirements
Tape stills and t_ (USB) jack t_ (USB) cable t_ (USB) connector,
movies/Picture _ _ _ {supplied) editing software
live fl'om your i.LINK cable i.LINK connector,
cameorder DV jack (optional) editing software
"Memory Stick"
stills and _ (USB) cable _ (USBJ connector,
movies _ t_ (USB) jack {supplied) editing software
When connecting to a computer via the USBjack, complete installation of the
USB driver beforehand. If you connect the camcorder to the computer first,
you will not be able to install the USB driver correctly.
For details about your computer's jacks and editing software, contact the computer
manufacturer.
182