Identifying parts and controls
The buttons that share the same name on the Remote Commander and your camcorder
function identically.
[] []
[]
[]
[]--
[]
[]
[]
[]
[]
[]
[]
[]
RMT-814
RMT-708
[] PHOTO button (p. 53, 56, 132)
[] DISPLAY button (p. 47)
[] SEARCH MODE button (p. 90, 92)
[] P<41/b,,l_l buttons (p. 90, 92)
[] Video control buttons (p. 45, 49)
[] Transmitter
Point toward the remote sensor to
control the cameorder after turning on
the camcorder.
To prepare the Remote Commander
Insert 2 size AA (R6) batteries by matching the + and polarities on the batteries to
the + marks inside the hatte_ T compartment.
[] ZERO SET MEMORY button (p. 89, 124)
[] START/STOP button (p. 30)
[] DATA CODE button (p. 47)
[] Power zoom button (p. 34)
RMT-814
264
Notes on the Remote Commander
• Point the remote sensor away fi'om strong light sources such as direct sunlight or
overhead lighting. Otherwise, the Remote Commander may not function properly.
• Your camcorder works in the commander mode VTR 2. The commander modes
1, 2 and 3 are used to distinguish your camcorder from other Sony VCRs to avoid
unintentional operations. If you use another Sony VCR in the commander mode
VTR 2, we recommend changing the commander mode or covering the sensor of the
VCR with black paper.
To Next Page
Loading...
