Changing the menu settings
POWER
Icon/item Mode Meaning switch *z/
[] OTHERS
VIDEO EDIT .4/ • RETURN To cancel video editing. VCR
TAPE To make a program and perform video editing
(p.106).
MEMORY To make a program and perform MPEG editing
(p. 156).
•5) To make a program and perform video editing VCR
(p. 106).
Note *_)
If you press DISPLAY with DISPLAY set to V-OUT/LCD in the menu settings, the
picture fl'om a TV or VCR will not appear on the screen even when your camcorder is
connected to outputs on the TV or VCR. (Except when your camcorder is connected
with the LLINK cable)
After five minutes of removing the power source *a)
The COMMANDER item returns to their default settings.
When recording a close subject
When REC LAMP is set to ON, the red camera recording lamp on tile front of the
cameorder may reflect on the subject if it is close. In this case, we recommend that you
set REC LAMP to OFF.
*_1Modes on the POWER switch vary depending on models (p. 16).
.21_ _
o
2.
o
223
To Next Page
