Recording pictures from a tape as a
moving picture
Your camcorder can read moving picture data recorded on tapes and record it as a
moving picture on a" Memory Stick2 Your camcorder can also capture moving picture
data through the input connector and record it as a moving picture on a" Memory
Stick."
The picture and sound are recorded up to the full capacity ofa" Memory Stick" (MPEG
MOVIE EX).
Before operation
• Insert a recorded tape into your camcorder.
• Insert a" Memory Stick" into your camcorder.
(1) Set the POWER switch to VCR.
(2) Press D"_. The picture recorded on the tape is played back.
And press II at the scene where you want to start recording from.
(3) Press START/STOP on your camcorder.
Images and sound are recorded up to the remaining capacity of the _Memory
Stick." For more information about recording time, see page 131.
(
2 PLAY PAUSE
To stop recording
PressSTART/STOP.
150
To Next Page
Loading...
