Recording still images on a tape - Tape Photo recording
Notes
• During Tape Photo recording, you cannot change the mode or setting.
• You cannot use PHOTO while using BOUNCE in tile Fader function.
• When recording a still image, do not shake your camcorder. The image may fluctuate.
• The tape photo recording does not work while using Fader (The {_Q indicator
flashes).
If you record a moving subject with the tape photo recording function
The image may fluctuate when you play back the still image on other equipment.
This is not a malfunction.
To use the tape photo recording function using the Remote Commander
Press PHOTO on the Remote Commander. Your camcorder records an hnage on the
screen immediately.
gJ_
O
_a
g
o
O
57
To Next Page
Loading...
