Using the fader function
When you set the POWER switch to MEMORY _
You cannot use the fader function.
When you select OVERLAP, WIPE, or DOT _
Your camcorder automatically stores the picture recorded on the tape. While the picture
is being stored, the indicator flashes fast, and the picture from tile tape appears on the
screen. At this stage, the picture may not be recorded clearly, depending on the tape
condition.
The date, time indicator _ _ _ and title do not fade in or fade out
Erase them before operating the fader function if they are not needed.
While using the bounce mode, you cannot use the following functions:
Recording on a" Memory Stick" _
Exposure _ _ _
FOCUS
Zoom
Picture effect
PROGRAM AE
BACK LIGHT
Note on the bounce mode
The BOUNCE indicator does not appear in tile following functions:
When D ZOOM is set to 40x or 700x. _ _
When D ZOOM is set to 40x or 560x. _ _ _
Wide mode
Picture effect
PROGRAM AE
o
O
_a
o
O
63
To Next Page
Loading...
