4 Operation
Checks and tasks before daily use
– Pull the seat belt (3) smoothly out of the belt
retractor and fasten closely around the body
over the thighs.
NOTE
Sit as far back as possible so that your back
is leaning against the seat backrest. The
automatic blocking mechanism permits
sufficient freedom of movement on the seat.
– Click the belt tongue (2) into the buckle (1).
– Check the tension of the seat belt. The belt
should fit closely around your body.
Special feature for trucks with a cab
(variant)
If the truck is equipped with a cab (variant),
it will have a cab door sensor. If the seat
belt is not fastened and the cab door is not
closed, the driving speed is limited to 4 km/h.
The message
Close the cab door or
fasten belt
appears in the display.
Fastening on a steep slope
The automatic blocking mechanism prevents
the belt from being extended whenever the
truck is on a steep gradient. It is no longer
possible to pull the seat belt out of the belt
retractor.
– Move away carefully from the slope.
– Fasten the seat belt.
102
56368011531 EN - 06/2019 - 02
To Next Page
Loading...
