Operation 4
Checks and tasks before daily use
Releasing the seat belt
7090_342-005
1
4
– Press the red button (4) on the
buckle (1).
– Slowly guide the belt tongue back to the
retractor by hand.
NOTE
Do not allow the seat belt to retract too quickly.
The automatic blocking mechanism may be
triggered if the belt tongue strikes the housing.
It will then no longer be possible to pull the seat
belt out with the usual force.
– Using increased force, pull the seat belt
around 10 to 15 mm out of the retractor to
disengage the blocking mechanism.
– Slowly allow the seat belt to retract again.
– Protect the seat belt from dirt, for example,
by covering it.
Malfunction due to cold weather condi-
tions
– If the buckle or belt retractor are frozen,
thaw the buckle and the belt retractor
and dry the parts to prevent them from
refreezing.
CAUTION
The seat belt may b
e damaged by heat!
Do not subject th
e buckle or belt retractor to exces-
sive heat when t
hawing.
– Do not use air wa
rmer than 60°C when thawing.
563
68011531 EN - 06/2019 - 02 103
To Next Page
Loading...
