Still RX20-20L - Page 216

4 Operation
Handling loads
Triple mini-lever:
– Move the 360° lever (3) back and forth
between positions (A) and (B) four times.
Then continue to move the component in
thesameway.
Quadruple mini-lever:
– Move the operating lever (4) back and forth
between positions (A) and (B) four times.
Then continue to move the component in
thesameway.
Fingertip:
– Move the operating lever (5) back and
forth four times. Then continue to move
the component in the same way.
202
56368011531 EN - 06/2019 - 02