User’s Manual
42 Software Configuration
Create a simple chase from selected fixtures - creates a traditional chase effect based on the selected fixtures. Each
fixture will be assigned to its own step on a 1 to 1 basis.
Enter appropriate info in the presented dialogue box.
NEO NOTES & TIPS: The effect will be recorded/edited but must be triggered manually though the FX List
display.
Create a simple RGB/CMY Cycle from selected fixtures - creates a simple step based color chase. All selected
fixtures color mixing parameters will be stored into 6 steps. Cyan, Blue, Magenta, Red, Yellow, and Green.
Enter appropriate info into the presented dialogue box.
Create a simple color wheel chase from selected fixtures - creates a simple step based color chase using the color
wheel. All selected fixtures color wheel will be stored into steps. 1 for each wheel position.
Enter appropriate info in the presented dialogue box.
To Next Page
Loading...
