Toshiba B-EP4DL-GH32-QM-R - Page 122

CHAPTER 4 TRANSMISSION SEQUENCE
B-EP Series
4-12
(2) When interrupting communication while the 2nd label command is running, and then
transmitting subsequent data,
1st transmission:
{AY;+00,1,3|}
{D0230,0480,0200|}
{C|}
{LC;0010,0010,0470,0060,1,2|} 1st label data
{XB00;0200,0050,0,3,02,0,0050,+0000000000,020,1,00|}
{RB00;0000001|}
{XS;I,0001,0000C2011|}
{AY;+00,1,3|}
{D0230,0480,0200|}
{C|}
{LC;0010,0010,0470,0060,1,2|} 2nd label data
{XB00;0200,0050,0,3,02,0,0050,+0
2nd transmission:
000000000,020,1,00|}
{RB00;0000002|}
{XS;I,0001,0000C2011|}
Print result: The 1st label data is printed after the 1st transmission, and the 2nd label data is
printed after the 2nd transmission.
Interrupts communication while the
command is running.
Transmits subsequent
data.