CHAPTER 5 TPCL-LE MODE (INTERFACE COMMANDS)
B-EP Series
5-85
Explanation
(1) Barcode number
When drawing by the Data Command ([ESC] RB), the format designated by the barcode
is selected.
(2) Print origin of coordinates
[Printing direction: Bottom first] [Printing direction: Top first]
The print origin of coordinates must be set so that the barcode drawing result will be within the
effective print area set by the Label Size Set Command ([ESC] D).
(3) Type of barcode
1: MSI 2: Interleaved 2 of 5
3: CODE39 (standard) 4: NW7
B: CODE39 (Full ASCII)
O: Industrial 2 of 5 a: Matrix 2 of 5 for NEC
Label
Paper feed direction
0
X
Y
Effective
print
length
Origin of
coordinates
(0, 0)
Effective
print width
Print origin of
coordinates
Backing paper
Backing paper
Paper feed direction
0
X
Y
Label
Effective
print
length
Origin of
coordinates
(0, 0)
Effective
print width
Print origin of
coordinates
To Next Page
Loading...
Need help?
General