CHAPTER 5 TPCL-LE MODE (INTERFACE COMMANDS)
B-EP Series
5-87
(6) Rotational angle of barcode
0° 90° 180° 270°
(7) Barcode height
(8) Increment/decrement
Printing is performed while the data is incremented or decremented every time a label is
issued. Where the data row exceeds the maximum number of digits (40), the data row
will not be drawn.
Initial value 0000 0000 0000 0000 999999
INC/DEC +10 +10 +10 +10 +1
Zero suppression
Not
designated
5 3 0 3
1st label 0000 0000 000 0000 999999
2nd label 0010 0010 010 0010 000
3rd label 0020 0020 020 0020 001
4th label 0030 0030 030 0030 002
5th label 0040 0040 040 0040 003
Letters and numerals for increment/decrement
For CODE39 (standard), CODE39 (full ASCII) and NW-7, even if a data string other than
numerals are included in the data, increment/decrement is performed. However, if any
code which does not exist in each barcode table is contained in the data,
increment/decrement is not performed.
For the data string, up to 40 digits (including letters, numerals, and symbols) are possible.
Only the numerals are selected and calculated for incrementing/decrementing, and then
are returned to the previous position to draw the data.
* 1 2 3 4 5 *
* 1 2 3 4 5 *
* 1 2 3 4 5 *
Point of origin
Height
Height
To Next Page
Loading...
