Toshiba B-EP4DL-GH32-QM-R Interface Specification

CHAPTER 5 TPCL-LE MODE (INTERFACE COMMANDS)
B-EP Series
5-114
Explanation
(1) Two-dimensional code number
When drawing by the Data Command ([ESC] RB), the format designated by the two-
dimensional code number is selected.
(2) Print origin of coordinates
[Printing direction: Bottom first] [Printing direction: Top first]
The print origin of coordinates must be set so that the two-dimensional code drawing
result will be within the effective print area set by the Label Size Set Command ([ESC] D).
(3) Type of two-dimensional code
P: PDF417
(4) Security level
The PDF417 contains a function to correct a code reading error using an error correcting
code word and restore normal data. The security level should be designated according
to usage.
Security level Error Correction Ability
No. of error correction
code words
Level 0 0
Level 1 2
Level 2 6
Level 3 14
Level 4 30
Level 5 62
Level 6 126
Level 7 254
Level 8 510
Label
Paper feed direction
0
X
Y
Effective
print
length
Origin of
coordinates
(0, 0)
Effective
print width
Print origin of
coordinates
Backing paper
Backing paper
Paper feed direction
0
X
Y
Label
Effective
print
length
Origin of
coordinates
(0, 0)
Effective
print width
Print origin of
coordinates
Low
High

Toshiba B-EP4DL-GH32-QM-R Specifications

General

Brand	Toshiba
Model	B-EP4DL-GH32-QM-R
Category	Printer
Language	English