CHAPTER 3 INTERFACE
B-EP Series
3-49
• Detailed status in the compatible mode for the B-SP series
“00”: Normal state
“01”: Cover open state
“02”: Operating (Including wait for strip, pause state, wait for battery recovery, wait for
head temperature reduction, wait for motor temperature reduction, and writable
character/PC command save mode)
“06”: Command syntax error (including Ir packet error)
“09”: Normal issue end + Label end
“11”: Paper jam
“13”: Label end (including)
“15”: Cover open error
“17”: Broken head dots error
“18”: Thermal head excessive temperature (Including ambient temperature error,
abnormal battery temperature, and battery excessive temperature)
“36”: Low battery
“37”: Charging error
“38”: Bluetooth setting successfully completed
(→ No response with Status Request Command)
“39”: Bluetooth setup error (including initialization error)
( “40”: Normal issue end) Response status for automatic status transmission
( “41”: Normal feed end) Response status for automatic status transmission
“50”: Flash ROM write error
“51”: Flash ROM erase error
“54”: Flash ROM storage area full state
• Status type ...... Indicated in 1-byte data
“1”: Status Request Command
“2”: Automatic status transmission
• Remaining No. of labels .... Indicated in 4-byte data
“0000” to “9999”
• CR/LF .............. Indicated in 2-byte data
To Next Page
Loading...
Need help?
General