USTER HVI 900 - Page 144

USTER® HVI 900 Instruction Manual
Uster Technologies, Inc. Chapter 7
Version 4.0 (1.99) Module Testing - Page 7-9
3.4.11 Reject Sample to Computer/
DataManager
When the test results for the last sample tested should be rejected,
ESCAPE from the Module Testing Screen, and select Reject Sample to
Computer/ DataManager . This sends a signal to the external computer
and/or to DataManager that the previous sample tested is to be
rejected. The test results for the rejected sample will not be included in
any mathematical analyses performed on the samples listed for that
identifier.
Immediately upon selecting Reject Sample to Computer/ DataManager ,
the test results for the last sample are rejected. If a problem occurs
while transmitting the data, the error message “Computer Not
Responding” is displayed on the screen.