USTER HVI 900 - Page 143

USTER® HVI 900 Instruction Manual
Uster Technologies, Inc. Chapter 7
Version 4.0 (1.99) Module Testing - Page 7-8
• Mean Fibrogram Curves - The data points that make up the
fibrogram for the mean of all observations will be transmitted.
•
Mean Stress/Strain Curves - The data points that make up the
Stress/Strain Curve for the mean of all observations will be
transmitted.
When you ESCAPE from the TRANSMISSION TYPE MENU after selecting
one or more of the items on the menu, the
External Compute r is
automatically turned "ON."
When
External Computer is "ON," two additional items are displayed
on the LEN/STRENGTH SAMPLE TESTING MENU. They are Reject Sample to
Computer/DataManager
and Sign-off External Computer. If the
External Computer is ON, the reject is displayed. Neither is displayed
if both are OFF. Each is described below.
3.4.10 DataManager
This selection alternates between Off and On using the ENTER key.
• Off — No test data will be available to the internal 940
DataManager.
• On — Test data will be available to the internal 940 DataManager.
An additional menu selection, Reject Sample to
Computer/DataManager , is added to the LENGTH/STRENGTH ONLY
SAMPLE TESTING MENU when DataManager is "On." If both
DataManager and External Computer are "On," two items are
added to the L
ENGTH/STRENGTH ONLY SAMPLE TESTING MENU. They
are Reject Sample to Computer/DataManager and Sign-off External
Computer . Each of these items is discussed below.