USTER HVI 900 - Page 142

USTER® HVI 900 Instruction Manual
Uster Technologies, Inc. Chapter 7
Version 4.0 (1.99) Module Testing - Page 7-7
• Individual Observations - Data on the individual observations
for each module will be transmitted. For example, if the system is set
up to perform two Length/Strength tests, one Micronaire test, and
four Color/Trash tests, the data for each of these seven tests will be
transmitted.
• Means - The mean value of the total number of tests for each
module will be transmitted. Using the example above, the mean
value of the two Length/Strength tests would be transmitted. In
addition, the MIC will be transmitted if it is either entered from the
keyboard or measured by the Micronaire Module.
•
Standard Deviations - The standard deviation of the total number
of observations will be transmitted.
• % CVs - The percent CV of the total number of observations will be
transmitted.
• Individual Fibrogram Curves - The data points that make up the
fibrogram for each observation will be transmitted.
• Individual Stress/Strain Curves - The data points that make up
the Stress/Strain Curve for each observation will be transmitted.