USTER HVI 900 - Page 159

USTER® HVI 900 Instruction Manual
Uster Technologies, Inc. Chapter 7
Version 4.0 (1.99) Module Testing - Page 7-24
5.4.5 Printer
This selection alternates between Off, On, and Averages using the
ENTER key.
• Off — No test results will be sent to the printer; the information will
only be displayed on the screen.
• On — All test results will be sent to the printer.
•
Averages — Only the averages of the test results will be sent to the
printer.
5.4.6 Color Hand
This selection alternates between Off and On.
• Off — The color hand remains in the upper position when the start
button(s) is pushed. The Off selection should be used when tiles are
measured.
• On — The color hand will move up and down to compress the
sample on the sample window when the start button(s) is pushed.
Note: The Color Hand selection should be "On" for Color/Trash Module
Testing of cotton.
5.4.7 Trash Type
This toggles between Cotton and Tiles for the appropriate calibration
values. Cotton is the default value.