USTER HVI 900 - Page 182

USTER® HVI 900 Instruction Manual
Uster Technologies, Inc. Chapter 8
Version 4.0 (1.99) 940 DataManager - Page 8-16
The current time, date, company name, Identifier, relative humidity and
temperature (if available), and report properties are in the report
header. The tests and the data for the report properties are listed for
each identifier. An average of the data for the tests is calculated and
displayed/printed at the end of the ID list.
If multiple identifiers are selected for the report, the identifiers are listed
in reverse chronological order. The average of the data for the tests
associated with a particular identifier is given before the next identifier
is listed.
The tests for each identifier are listed in alphabetical order.
4.12.1 Report Generated to Screen
If the report destination is the screen, the report is immediately displayed
on the monitor. Those properties that are not within Lot Limit
specifications at test time are highlighted on the screen.
If the entire report cannot be displayed on one screen, use the keys
listed below to move quickly through the report.
 Down Arrow scrolls to display the next line of data
 Up Arrow scrolls to display the previous line

Page Down displays the next screen of data

Page Up displays the previous screen of data

End displays the last screen of data
 Home displays the first screen of data
When are done reviewing the report, press ESCAPE to return to the
REPORTS MENU. If you want to print the report after you have viewed it
on the screen, follow these steps.
•
Change the destination to Printer . Select Make Report. The report
will be printed.