USTER HVI 900 - Page 191

USTER® HVI 900 Instruction Manual
Uster Technologies, Inc. Chapter 8
Version 4.0 (1.99) 940 DataManager - Page 8-25
6.7.2 Identifier-Named Disk File
Data for each identifier that has been selected will be exported to a
separate file. The filename(s) will be the same as the identifier name(s).
• If you want to use the identifier as the filename when data is
exported, select Identifier-Named Disk File and press ENTER. Then,
enter the path to the location where the files are to be written. After
you have entered the path, press ESCAPE to return to the DATA
EXPORT MENU.
• Identifier-Named Disk File is displayed on the Destination line.
6.7.3 Transmit
The Transmit item on the DESTINATION MENU is used to export data over
the serial port. When it is selection, the Data Export window
reappears, and "Transmit" is displayed on the Destination line. When
Export Data is selected, the data for the selected identifiers is transmitted
from a serial port. The particular port and the settings are determined
by the Communications Settings, which are discussed in the next
section.