USTER®
HVI 900
Instruction Manual
Uster Technologies, Inc.
Chapter 8
Version 4.0 (1.99) 940 DataManager - Page 8-27
• Select the
communications port
to be used for exporting data. After
making your selection, press ENTER.
The C
OMMUNICATIONS MENU will reappear, and the selected
communications port will be listed to the right of Port.
The internal 940 DataManager can only export to Com 4. If you select
Port
while using the internal DataManager, a message box is displayed
on the screen indicating that the HVI can only export to Com 4. If you
use DataManager on an external computer, all ports are available.
6.8.2 Baud Rate
This is the rate (in bits per second) at which information is transmitted
over a serial path. For successful serial communication, the baud rate of
the computer and peripheral must be the same. The following options
are available:
¾
300
¾ 1200
¾ 2400
¾ 4800
¾ 9600
¾ 19200
¾
38400
¾
56000
Select the
baud rate
to be used for exporting data and press ENTER.
The C
OMMUNICATIONS MENU will reappear, and the selected baud rate
is listed to the right of Baud Rate.
To Next Page
