USTER HVI 900 - Page 300

USTER® HVI 900 Instruction Manual
Uster Technologies, Inc. Chapter 14
Version 4.0 (1.99) Appendix - Page 14-34
03 Standard Deviation of Observations
Field Description Size/Type
Identifier 40 alphanumerics
Sample ID 12 alphanumerics
Maturity x.xx
reserved No characters
reserved No characters
04 %CV of Observations
Field Description Size/Type
Identifier 40 alphanumerics
Sample ID 12 alphanumerics
Maturity xxx.x
reserved No characters
reserved No characters
13 Error Messages
Error messages are displayed on the screen in a highlighted block, in
conjunction with a long audio tone, when the microprocessor is unable
to accept or process information. If any of these messages occur
repeatedly, call a Service Technician. The following is a list of the error
messages that you may encounter, what might have caused them to
occur, and how to correct them.
<-- Large
A sample too large for an
accurate reading was used to obtain
length and strength properties.
<-- Limit
The property has measured outside the
lot limit range. This range is set in the
Status Menu.