USTER HVI 900 - Page 330

USTER® HVI 900 SA Instruction Manual
Uster Technologies, Inc. Chapter 16
Version 4.0 (1.99) Index - Page 16-8
Length Standard Check, 5-12
Length Standard Value, 5-12
Length/Strength Calibration, 5-3
Cotton Calibration, 5-15
Length and Strength Calibration Menu, 5-3
Length and Strength Calibration Status Menu, 5-4
Length Standard Calibration Menu, 5-9
Lens to Break Calibration Menu, 5-12
Mechanical Elongation Calibration, 5-23
Length/Strength Calibration Constants, 5-6
Length/Strength Calibration Cotton Standard Values, 5-8
Length/Strength Module, 1-4
900 Automatic, 1-6
900 Semi-Automatic, 1-5
Length/Strength Module Testing, 8-2
Continue with Testing, 8-3
DataManager, 8-7
Exit Length/Strength Module Testing, 8-12
Explanation of the Length/Strength Module Testing Screen, 8-9
External Computer, 8-5
Identifier, 8-3
Micronaire Data, 8-4
Number of Tests, 8-4
Print Mode, 8-4
Printer, 8-4
Reject Sample to Computer/DataManager, 8-8
Sample Eject, 8-3
Sign Off External Computer, 8-8
Strength Measurement, 8-5, 8-5
Testing Procedures, 8-10
Length/Strength Module Testing Procedures, 8-10
Length/Strength Module Testing Screen, 8-9
Lens to Break Calibration, 5-13
Lens to Break Calibration Menu, 5-12, 5-13
Length and Strength Lens to Break Calibration Menu, 5-14
Length and Strength Lens to Break Test Results Screen, 5-14
Lens to Break Calibration, 5-13
Lens to Break Calibration Menu, 5-13
Lens to Break Value, 5-15
Lens to Break Value, 5-15
Limits to Selecting Properties, 9-10
Lot Limits, 4-17, 14-15
Lot Limits Menu, 4-1, 4-17, 4-19
Low Cotton Value and High Cotton Value, 5-30
M
Main Menu, 3-4
940 DataManager, 3-6
Calibration, 3-5
Diagnostics, 3-7
Man-Made Testing, 3-6