Fig 7-11 Cylinder liner (example)
12 Attach the chain (001, Figure 7-12) to the shackle on the lifting tool (002).
13 Operate the engine room crane to lift the cylinder liner (008) into the bottom water guide
jacket (007).
14 Remove the flanges (004, Figure 7-11).
15 Attach the lever chain hoists (004, Figure 7-12) to the shackle (003) and the shackle
(005) as shown.
16 Operate the lever chain hoists (004) to lift the water guide jacket (007).
17 Attach the water guide jacket (007) to the cylinder liner (008) with the bolts (006).
18 Remove the lever chain hoists (004) and the shackles (003 and 005).
X62DF
AA00-2124-00AAA-720A-A
Maintenance Manual Cylinder liner - install
Winterthur Gas & Diesel Ltd.
- 190 - Issue 002 2020-10
To Next Page
Loading...
