SmartPAC 2 with WPC 2000 Integration User Manual 1128600
Installation 2-23
WPC 2000 provides wiring connections for up to two pairs of light curtains (see Table 2-27,
page 2-114). If you wire two sets of light curtains, you must enable them on S101 option
switch 6 (see Table 4-10, page 4-38).
Installing Shadow Light Curtains
Wiring connections for Shadow light curtains are provided in the following wiring diagrams
at the back of the manual:
• Shadow V–Figure 4
• Shadow VI–Figure 14
• Shadow VI Integrated–Figure 15
• Shadow VII–Figures 20 and 21
• Shadow 8–Figures 23 and 24
• Shadow 9–Figures 25, 26, and 27
For Shadow I or Shadow II wiring, contact Wintriss Tech. Support. For complete Shadow
light curtain mounting instructions, see your Shadow user manual.
Setting Jumpers for Shadow VII, Shadow 8, and Shadow 9 Light Curtains
When you install Shadow VII, Shadow 8, or Shadow 9 light curtains on your press, you must
set jumpers JP121-JP124 on the WPC 2000 Main Processor board (see Figure 2-14,
page 2-28) to the positions shown in Table 2-3. Wiring diagrams are provided in figures 20
(Shadow VII control box), 21 (Shadow VII DIN controller), 23 (Shadow 8 optional control),
24 (Shadow 8 wired directly to WPC 2000), 26 (WPC 2000 and Shadow 9 Control Box
Wiring Diagram), 27 (WPC 2000 and Shadow 9 Wiring Diagram), and 28 (Dual Shadow 9
WPC 2000 Wiring Diagram) at the end of the manual.
Installing Non-Shadow Light Curtains
If you plan to interface a light curtain system other than Shadow with your WPC 2000, please
call Wintriss Tech. Support for instructions. Be ready to provide the following information:
Table 2-3. Shadow VII, Shadow 8, and Shadow 9 Light Curtain Jumper Settings
Jumper on Main
Processor Board Settings
Light Curtain #1
JP123 PNP
JP124 INT
Light Curtain #2
JP121 PNP
JP122 INT
It is your responsibility to ensure that your light curtains are control reliable and intended for use on
a mechanical power press as a primary point-of-operation guard. The manufacturer of your light
curtain should be able to provide the necessary information.
Failure to comply with these instructions could result in death or serious injury.
To Next Page
